LED LIGHTING @ INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA (UIAM), GOMBAK
HOME/ PROJECT / LED LIGHTING @ INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA (UIAM), GOMBAK
LED LIGHTING @ INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA (UIAM), GOMBAK
Date: 2018 Categories: LED Lighting
International Islamic University Malaysia (IIUM) main campus is at Gombak Kuala Lumpur which houses are 8 faculties. Under a performance contract, the traditional lighting was upgraded to LED lighting. The clients planned to apply energy saving methods in the university.
The scope of the work was to manufacture & install the T8 LED tube lights in the university. For this project, the T8 LED tube light to replace was 42,000 units. The clients gave four months to complete this lighting project. The challenge was to store the product on site. The solution is to store 2 shipments of LED tube lights in a 40 feet container. Another challenge at that time was to install during and around working hours which classes, offices and the library was occupied. Access to some area was restricted to Saturdays. All installation work was done with the presence from the clients and the maintenance team. Every day, documentation was updated to identify the quantity installed and the locations. Every single tube was identified by zone and serial number.
Apart from some site delay, difficulty to access some areas, the project was completed in good time. The targets have been achieved, and IIUM experienced significant reduction in energy and maintenance cost. The impact of the change is clearly noticeable, with improvement of in all areas of illumination. The maintenance costs have been reduced as a result of the modernization, and IIUM took a significant step to be environmentally friendly.
HOME/ PROJECT / LED LIGHTING @ HONDA MALAYSIA SDN. BHD. MELAKA HOSPITAL
LED LIGHTING @ HONDA MALAYSIA SDN. BHD. MELAKA
Date: 2018 Categories: LED Lighting Items: LED Hi-Mast
Our latest contribution to the automotive industry in their security and storage component is the changing of their 1000W metal halide floodlights to the 400W AdvanLED LED hi-mast lighting. The overal size of the project are the setting of this project was a parking lot of 140,000 square meters. The quantity of lighting is 14 lamps for every 25 meter pole in a circular configuration.
The clients wished to improve on the lighting products used in several aspects, such as the lifetime and reliability of energy consumption. However, unexpectedly the most expensive reason is the presence of birds hitting the conventional lighting casing, which is coverd in glass and causing breakage. The falling glass damages the cars parked in the area making them no good for sale.
The solution was to simulate the required brightness, layout and angle of the lights based on the area of coverage. Using 10 units of 400W AdvanLED hi-Mast lighting to per pole for a total of 100 units. We were able to achieve the desired lux levels and even distribution for security camera visibility.
The result was easily capture on security cameras as a marked improvement on the lighting performance. Expected ROI from savings and usage was 1.5 years. Expected lifetime based on usage is 15 years.
Honda Malaysia Sdn. Bhd.
Access Street View By Dragging the To The Red Pin On The Google Map.
LED HIGH BAY LIGHTING @ PARKSIDE FLEXIBLES SELANGOR
HOME/ PROJECT / LED HIGH BAY LIGHTING @ PARKSIDE FLEXIBLES SELANGOR
LED HIGH BAY LIGHTING @ PARKSIDE FLEXIBLES SELANGOR
A complete LED high bay lighting project.
Parkside Flexibles is a major player in food industry packaging. Keeping in line with their belief in using the latest technology in their packaging systems, they planned a full scale renovation and upgrading works in 2017 for their recently acquired factory in Shah Alam. After searching extensively for the best local partner, AdvanLED answered the call to audit and work with Parkside to come out with a complete LED high bay lighting design.
The original lighting was a old 55 pcs 250W Metal halide high bays at less than ideal positions and height. Lighting layouts were unsuitable with obstruction and misalignment with current operations and warehousing systems and rackings. The 52 pieces ADVANLED LED HI BAY G2 used was the most cost efficient and value for money product to use at that time. Using the best 50,000 hour driver and the most cost effective LED configuration. Expected ROI was 6 months. The layout and positioning of the lights were adjusted for the most efficiency and uniformity
Our engineers worked on drafting current lighting plans, new lighting plans and layouts with the required lux levels. Post simulation results were sent to the client for approval and we started the manufacturing works. Installation was also done by us with our engineers coordinating with Parkside for the best installation times to keep factory disruptions to the minimum. We worked at nights and during the weekends for the most productive periods to complete the project in time and within the customer expectations. We also did a T&C and verified the lux values.
The result was easily recognised by owners and the users as a marked improvement on the lighting performance. Coordinating with their production schedule and reducing the impact on production as much as possible, the installation was done without complications for a highly satisfied client.
The Klang Valley MRT project is the construction of a rail-based public transport network for the greater Klang Valley. The first MRT line to be implemented is the 51km Sungai Buloh-Kajang line. The line will run underground for a distance of 9.5km beneath the centre of Kuala Lumpur while the rest of the alignment is elevated. The line will have 31 stations of which 7 will be underground.
For the underground stations, tender was released on 2015, seperated into 2 packages. On 1 April 2015, LED Vision and SENA JV received the award for both packages.
Job scope: Supply, delivery and supervision of installation, testing and commissioning of LED lighting for underground stations from KL Sentral to Bukit Bintang & from Pasar Rakyat to Maluri.
The 7 underground stations were categorised into the following table:
Package U1
Package U2
1. Pasar Seni
5. Tunku Razak Interchange (TRX)
2. Merdeka
6. Cochrane
3. Bukit Bintang
7. Maluri
4. Muzium Negara
Part of the tender requirements was that the lights are to be manufactured by or partnered with shortlisted Malaysian manufacturers. LED Vision Sdn Bhd is one of these companies recognised by MRT to be capable to supply the products for this project.
One of the challenges was to consolidate the ID design intent with the stringent safety requirements for a public transportation facilities.
Therefore, constant modifications and coordinations were required between LED Vision & architects.
LED FLOOD LIGHT @ COOLER WAREHOUSE PROJECT (H: 11M)
Date: 2014-12-16 Categories: LED Lighting
A critical component to food logistics and transportation is the ability to keep products under a certain temperature to maintain freshness and prevent growth of microbes. Cold storage warehouses, prevalent near ports, such as Port Klang and Tanjung Pelepas, and airports, are an integral part of this distribution system. These facilities are fully concealed and have no access to natural lighting. Therefore the reliance is on artificial lighting 100% of the time. Under subzero temperatures going into -24°C, conventional lighting lifetime is heavily compromised. Very quickly, the lighting output will dim down and lose its effectiveness. The heat generated by said lamps also contributes to the energy consumed in the air conditioning and is an unnecessary wastage of energy. Furthermore, lighting colour is important as the cooler coolers have a higher refraction value, combined with the cold, misty air, warmer colours is needed to increase visibility and to make lighting comfortable.
In this scenario, LED lighting is able to excel in performance, lifetime and reliability . The cold temperatures increases the lifetime of LED based products. The main concern, as for most electronic products in high condensation environments is water vapor appearing in the circuit boards. Our AdvanLED products are fully protected with IP 65 ingress protection and all our circuitry is protected by an anti vapor film thereby removing the fear of degradation due to vapor. Apart from the increase efficiency in energy for the lighting products themselves, the drop in air conditioning energy is also significant. In addition, we have customised cable and cable glands meant for subzero temperatures to prevent hardening. LED are also incredibly flexible with colour selection and warm colours are readily available.The following are all our products suitable for Cold Storage environments.
To The Red Pin On The Google Map.
