LED HIGH BAY LIGHTING @ PARKSIDE FLEXIBLES SELANGOR
LED HIGH BAY LIGHTING @ PARKSIDE FLEXIBLES SELANGOR
LED HIGH BAY LIGHTING @ PARKSIDE FLEXIBLES SELANGOR
Parkside Flexibles
- Access Street View By Dragging the
To The Red Pin On The Google Map.
To The Red Pin On The Google Map.
LED DOWNLIGHT (DLMA)
PRODUCTS / INDOOR LED LIGHTING / LED DOWN LIGHT (DLMA)
Indoor or interior lighting
Indoor lighting for a building is the light source that is being integrated into the inner of the building for some general purpose such as brighten the room and give some special or desired effect to the room. The lighting in a home will changes the mood of person in the room just as it does the perceived size of a room. The lighting in a room either provides illumination for the entirety of the room, it highlights very specific elements. Fixture, placement and type of lighting are all the important aspects of indoor design, and they work in conjunction with color selections, size, availability of natural light and furniture selection. The elements that come together when the right lighting is achieved and this can transform a room into a seamless combination of functionality and style.
How indoor lighting affect us
There is a lots of research says that the effect of indoor light has on our emotional system. This is because the light will being perceived as heat, and the perception of heat can trigger our emotions. Beside that, indoor lighting regulates a lot of human behaviors and activities such as sleep and attentiveness. Research have state that students who study in environments with the natural day lighting can increase in their academic performance. Natural light is always preferred but not always attainable in a classroom or work environment. So, indoor light have affect us in our daily light, we need to be more careful when dealing with the purchasing and installation of indoor light.
DLMA LED DOWN LIGHT
A LED Recessed light or LED Downlight (also pot light in Canadian English, sometimes can light (for canister light) in American English) is a light fixture that is installed into a hollow opening in a ceiling. When installed it appears to have light shining from a hole in the ceiling, concentrating the light in a downward direction as a broad floodlight or narrow spotlight. Malaysia
“Pot light” or “canister light” implies the hole is circular and the lighting fixture is cylindrical, like a pot or canister.
There are three parts to a recessed lighting fixture: housing, trim and bulb. The trim is the visible portion of the light. It is the insert that is seen when looking up into the fixture, and also includes the thin lining around the edge of the light. The housing is the fixture itself that is installed inside the ceiling and contains the lamp holder. There are many different types of bulbs that can be inserted into recessed lighting fixtures, with the amount of heat generated by the bulb being a unique consideration.
In North America, UL 1598 recessed housings generally fall into one of four categories.
IC or “insulation contact” rated new construction housings are attached to the ceiling supports before the ceiling surface is installed. If the area above the ceiling is accessible these fixtures may also be installed from within the attic space. IC housings must be installed wherever insulation will be in direct contact with the housing.
Non-IC rated new construction housings are used in the same situations as the IC rated new construction housings, only they require that there be no contact with insulation and at least 3 in (7.6 cm) spacing from insulation. These housings are typically rated up to 150 watts.
IC rated remodel housings are used in existing ceilings where insulation will be present and in contact with the fixture.
Non-IC rated remodel housings are used for existing ceilings where, ideally, no insulation is present. However, these also require that there be no contact with insulation and at least 3 in (7.6 cm) spacing from insulation. Sloped-ceiling housings are available for both insulated and non-insulated ceilings that are vaulted.
The main feature of the housing is designed to ensure that no flammable materials come into contact with the hot lighting fixture. Badly-housed downlights can be a fire hazard, though all newer ones contain a self-resetting thermal switch for safety.
The housings come in various sizes based on the diameter of the circular opening where the lamp is installed. The most commonly used sizes are 4, 5 and 6 inches in diameter, with 4 inch IC New Construction units less readily available at present. Smaller housings (2 and 3 inch) are also available for specialized uses.
The housing can also be “Air Tight”, which means it will not allow air to escape into the ceiling or attic, thus reducing both heating and cooling costs.
The City of Chicago has an additional requirement “Chicago Plenum” which requires the housing to be airtight in addition to requiring all wiring and to be sealed off and gasketed from the plenum air space. This housing rating must be used on all recessed luminaires installed in air plenums in the City of Chicago as well as nearby municipalities which have adopted the Chicago amendments to the NEC. The intent of this rating is to prevent potential sparks from escaping the luminaire into the air plenum and getting recirculated in the HVAC system.
Indoor Lighting Technology Trend In Fourth Industry Revolution
1) Connectivity–With LEDs comprehensively in the mainstream, the next frontier in lighting is controls. Call it smart, call it connected, call it what you like – the point is that your lights can be controlled. Controller and sensors have been around for donkey’s years, but the challenge now is to make them more sophisticated, get them to communicate with other devices and make sure people use them to perform more and more task.
2) The internet of things (IoT)-There are only computer , smart-phone and other smart device can be connected to web. With the internet of things(IoT) technology, it’s no longer just computers and smart-phones that are connected to the web, but also your clothes, your coffee cup, your heart monitor and your LED lights. Lighting is an ideal network for internet-of-things services to be built on – because it’s already there in the ceiling of every building, looking down at us, wired up and ready to go. You only have to add a few sensors or controller so that it can make some data connection with other user.
3) Built-in light sources–Because LED light sources have good quality, so it don’t have to be replaced very often, and because no standards have emerged for what they should be like, manufacturers have got used to building them into fittings, rather than designing new luminaires around replaceable ‘lamps’. But what happens if they fail early? Or a better, more efficient module comes on the market? Organisations such as Zhaga have sought to address the issue by coming up with agreed designs, but integrated modules are becoming the norm. Will we regret lumbering our clients with light sources they can’t change?
SOFT ACCENT RECESSED DOWNLIGHT
PRODUCTS / INDOOR LED LIGHTING/ SOFT ACCENT RECESSED DOWNLIGHT
Indoor or interior lighting
Indoor lighting for a building is the light source that is being integrated into the inner of the building for some general purpose such as brighten the room and give some special or desired effect to the room. The lighting in a home will changes the mood of person in the room just as it does the perceived size of a room. The lighting in a room either provides illumination for the entirety of the room, it highlights very specific elements. Fixture, placement and type of lighting are all the important aspects of indoor design, and they work in conjunction with color selections, size, availability of natural light and furniture selection. The elements that come together when the right lighting is achieved and this can transform a room into a seamless combination of functionality and style.
How indoor lighting affect us
There is a lots of research says that the effect of indoor light has on our emotional system. This is because the light will being perceived as heat, and the perception of heat can trigger our emotions. Beside that, indoor lighting regulates a lot of human behaviors and activities such as sleep and attentiveness. Research have state that students who study in environments with the natural day lighting can increase in their academic performance. Natural light is always preferred but not always attainable in a classroom or work environment. So, indoor light have affect us in our daily light, we need to be more careful when dealing with the purchasing and installation of indoor light.
SOFT ACCENT RECESSED DOWNLIGHT
A LED Recessed light or LED Downlight (also pot light in Canadian English, sometimes can light (for canister light) in American English) is a light fixture that is installed into a hollow opening in a ceiling. When installed it appears to have light shining from a hole in the ceiling, concentrating the light in a downward direction as a broad floodlight or narrow spotlight. Malaysia
“Pot light” or “canister light” implies the hole is circular and the lighting fixture is cylindrical, like a pot or canister.
There are three parts to a recessed lighting fixture: housing, trim and bulb. The trim is the visible portion of the light. It is the insert that is seen when looking up into the fixture, and also includes the thin lining around the edge of the light. The housing is the fixture itself that is installed inside the ceiling and contains the lamp holder. There are many different types of bulbs that can be inserted into recessed lighting fixtures, with the amount of heat generated by the bulb being a unique consideration.
In North America, UL 1598 recessed housings generally fall into one of four categories.
IC or “insulation contact” rated new construction housings are attached to the ceiling supports before the ceiling surface is installed. If the area above the ceiling is accessible these fixtures may also be installed from within the attic space. IC housings must be installed wherever insulation will be in direct contact with the housing.
Non-IC rated new construction housings are used in the same situations as the IC rated new construction housings, only they require that there be no contact with insulation and at least 3 in (7.6 cm) spacing from insulation. These housings are typically rated up to 150 watts.
IC rated remodel housings are used in existing ceilings where insulation will be present and in contact with the fixture.
Non-IC rated remodel housings are used for existing ceilings where, ideally, no insulation is present. However, these also require that there be no contact with insulation and at least 3 in (7.6 cm) spacing from insulation. Sloped-ceiling housings are available for both insulated and non-insulated ceilings that are vaulted.
The main feature of the housing is designed to ensure that no flammable materials come into contact with the hot lighting fixture. Badly-housed downlights can be a fire hazard, though all newer ones contain a self-resetting thermal switch for safety.
The housings come in various sizes based on the diameter of the circular opening where the lamp is installed. The most commonly used sizes are 4, 5 and 6 inches in diameter, with 4 inch IC New Construction units less readily available at present. Smaller housings (2 and 3 inch) are also available for specialized uses.
The housing can also be “Air Tight”, which means it will not allow air to escape into the ceiling or attic, thus reducing both heating and cooling costs.
The City of Chicago has an additional requirement “Chicago Plenum” which requires the housing to be airtight in addition to requiring all wiring and to be sealed off and gasketed from the plenum air space. This housing rating must be used on all recessed luminaires installed in air plenums in the City of Chicago as well as nearby municipalities which have adopted the Chicago amendments to the NEC. The intent of this rating is to prevent potential sparks from escaping the luminaire into the air plenum and getting recirculated in the HVAC system
Indoor Lighting Technology Trend In Fourth Industry Revolution
1) Connectivity–With LEDs comprehensively in the mainstream, the next frontier in lighting is controls. Call it smart, call it connected, call it what you like – the point is that your lights can be controlled. Controller and sensors have been around for donkey’s years, but the challenge now is to make them more sophisticated, get them to communicate with other devices and make sure people use them to perform more and more task.
2) The internet of things (IoT)-There are only computer , smart-phone and other smart device can be connected to web. With the internet of things(IoT) technology, it’s no longer just computers and smart-phones that are connected to the web, but also your clothes, your coffee cup, your heart monitor and your LED lights. Lighting is an ideal network for internet-of-things services to be built on – because it’s already there in the ceiling of every building, looking down at us, wired up and ready to go. You only have to add a few sensors or controller so that it can make some data connection with other user.
3) Built-in light sources–Because LED light sources have good quality, so it don’t have to be replaced very often, and because no standards have emerged for what they should be like, manufacturers have got used to building them into fittings, rather than designing new luminaires around replaceable ‘lamps’. But what happens if they fail early? Or a better, more efficient module comes on the market? Organisations such as Zhaga have sought to address the issue by coming up with agreed designs, but integrated modules are becoming the norm. Will we regret lumbering our clients with light sources they can’t change?
LOVE GIFTS FOR SENIOR CITIZENS
LOVE GIFTS FOR SENIOR CITIZENS
HOME / CSR PROJECTS / LOVE GIFTS FOR SENIOR CITIZENS
As a responsible corporate entity, we believe in giving back to the community and making a difference in the lives of those in need. The Love Gift for Senior Citizens is our way of showing love and care to the elderly, who often face loneliness and neglect in our fast-paced world.
Our dedicated team at LED Vision works tirelessly to organize and implement this initiative, which aims to bring smiles and joy to the faces of senior citizens. Through this program, we provide essential supplies, companionship, and support to those who have contributed so much to our society.
By focusing on the well-being of senior citizens, we strive to create a more inclusive and compassionate society. We firmly believe that everyone deserves to be treated with respect and dignity, regardless of their age or background. The Love Gift initiative allows us to connect with senior citizens, listen to their stories, and offer them a sense of belonging and purpose.
LED Vision’s commitment to corporate social responsibility goes beyond just material assistance. We actively engage with senior citizens, organizing events and activities that promote social interaction and mental well-being. From group outings and hobby clubs to health and wellness workshops, we provide opportunities for senior citizens to stay active, maintain social connections, and lead fulfilling lives.
Through our CSR efforts, we aim to inspire others to join us in making a positive impact on society. Together, we can create a more compassionate and caring world, where every individual, especially our senior citizens, feels valued and cherished.
Join LED Vision’s Love Gift for Senior Citizens initiative and help us spread love and care to the elderly. Together, let’s make a difference in their lives and show them that they are not forgotten.
SMD P3 INDOOR DISPLAY
SMD P3 – INDOOR
PRODUCTS / INDOOR LED DISPLAYS / SMD P3 – INDOOR
SMD P3 Indoor Display
SMD P3 features:
- Light weight
- Good compatibility
- Realiable performance
- Quick installation
Applications:
- Indoor Hall
- Exhibition Halls
- Conference Rooms
- Etc
CONTACT INFO
LED Vision Sdn. Bhd.
No 109, Jalan PM 1,
Taman Perindustrian Merdeka,
Batu Berendam, 75350
Melaka, Malaysia
Working Hours
Monday-Friday : 9.00 am- 6.00pm
Saturday (alternate) : 9.00 am- 1.00 pm
Sunday and Public Holiday : Closed
Telephone: +606-317 3668
FAX: +606-317 3882
E-mail: sales@ledvision.com.my
CONTACT US TODAY
What is LED Display Board
A led display board is an electronic device for presentation of images or text as well as video which without producing a permanent record. Electronic visual displays include television sets, computer monitors and digital display for shop. In an LED display, thousands of tiny LED bulbs are lined up next to each other to create an image. LED display is particularly popular in outdoor settings because it is rugged, long lasting, and easy to see even in daylight.
Function
A display board is use to convey some message or information to the viewer according to the electronic input signal that receive by the display board.
Conventional display board
Neon display board are electric display board lit up by long luminous gas-discharge tubes that contain rarefied neon and some other gases. It was first introduced in 1910 at the Paris Motor Show, it are produce by the craft of bending glass tubing into shapes. A worker skilled in this craft is known as a glass bender, neon or tube bender. The neon display industry began to decline in the past several decades due to the rise of LED display industry.
P3 INDOOR LED DISPLAY
An P3 LED display is a flat panel display, which uses an array of light-emitting diodes as pixels for a video display. Their brightness allows them to be used outdoors where they are visible in the sun for store signs and billboards, and in recent years they have also become commonly used in destination signs on public transport vehicles, as well as variable-message signs on highways. LED displays are capable of providing general illumination in addition to visual display, as when used for stage lighting or other decorative (as opposed to informational) purposes in Malaysia.
The 1977 model was monochromatic by design. The efficient Blue LED completing the color triad, did not arrive for another decade. Large displays now use high-brightness diodes to generate a wide spectrum of colors. It took three decades and organic light-emitting diodes for Sony to introduce an OLED TV, the Sony XEL-1 OLED screen which was marketed in 2009. Later, at CES 2012, Sony presented Crystal LED, a TV with a true LED-display (in which LEDs are used to produce actual images rather than acting as backlighting for other types of display, as in LED-backlit LCDs which are commonly marketed as LED TV In Malaysia.
Indoor and outdoor display difference
We can divide the LED displays into two main categories, which is the indoor and outdoor LED display. Led display is design to meet the needs of nearly anyone seeking an energy-efficient way reaching more people and getting their message across–indoor displays and outdoor displays. The 2 categories have some of the differences, but what people often don’t realize the differences between them. List below have outline some of the main differences between the indoor LED displays and outdoor LED displays that are available in the market in nowadays. No matter the type of LED display you are looking to purchase, there are certain characteristics that you should be sure to take into account. There are reasons why we manufacture indoor LED displays the way we do, and there are other reasons why outdoor LED displays are manufactured differently from the indoor LED display. When deciding which LED display is right for you, be sure to take each of these factors into consideration.
1) Resolution of the display board-The first difference between indoor LED displays and outdoor LED displays is the resolutions that the LED display possess. For the outdoor LED display, it was normally designed to be viewed from a farther distances than the indoor display, so, the outdoor display can rely on lower resolutions with very little compromise in terms of visibility. But, in the other case, the indoor LED display that are normally designed to be viewed from a shorter distances require higher resolutions to give the audience a view with optimal and best quality.
2) Brightness of the display board-The second difference between the indoor and outdoor display is the brightness of LED displays. The brightness of outdoor display should be higher than indoor display. This is because bright sunlight can make dull displays more difficult to read, so indoor display which do not have to compete with the unpredictability light source of outdoor weather conditions will need only a very low brightness. Thus, outdoor LED displays are usually manufactured to be brighter than indoor LED display.
3) Durability of the display board – The third difference between the indoor and outdoor display is the durability of LED displays. The most obvious and commonly thought of difference between indoor LED signs and outdoor LED signs relates to the ability of the display to withstand some extreme weather conditions. Because indoor LED displays are not exposed to the outside, additional protections are not necessary, whereas for the outdoor LED displays, extra protection is necessary, especially in certain geographic regions where extreme weather conditions are frequently experienced.